Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual page 301

Configuring the QoS
Shaping Mode
Reference the
Parameter Definition
Within a Scheduler
Profile
Copyright © 2010, Juniper Networks, Inc.
Chapter 28: Configuring the Shaping Mode for Ethernet with QoS Parameters
host1(config)#qos-parameter-define byte-adjustment application
qos-byte-adjustment
Define the controlled-interface types for vlan and ip to adjust the shaping rate for the
2.
VLAN and IP queues.
a. Configure the controlled-interface type for VLAN.
b. Configure the controlled-interface type for IP.
host1(config-qos-parameter-define)#controlled-interface-type vlan
host1(config-qos-parameter-define)#controlled-interface-type ip
host1(config-qos-parameter-define)#exit
The QoS administrator then configures the QoS shaping mode using the QoS cell mode
application. When you configure the QoS shaping mode to cell mode on port 0 of the
IOA, all ports on the IOA use the same value.
Configure a parameter definition named cell-mode.
1.
host1(config)#qos-parameter-define cell-mode application qos-cell-mode
Define the controlled-interface types for vlan and ip for the shaping mode.
2.
host1(config-qos-parameter-define)#controlled-interface-type vlan
host1(config-qos-parameter-define)#controlled-interface-type ip
host1(config-qos-parameter-define)#exit
The QoS administrator configures the shaping rate and the shared-shaping rate within
scheduler profiles for the subscribers at VC1 and VC2.
Configure the scheduler profile for the subscriber VC1.
1.
a. Configure the scheduler profile named vc1.
b. Configure the shared-shaping rate of 10000000 with a burst of 10 milliseconds.
host1(config)#scheduler-profile vc1
host1(config-scheduler-profile)#shared-shaping-rate 10000000 burst 10
milliseconds
host1(config-scheduler-profile)#exit
Configure the scheduler profile for the voice service.
2.
a. Configure the scheduler profile named voice.
b. Configure the shared-shaping rate of 100000 with a burst of 10 milliseconds.
host1(config)#scheduler-profile voice
host1(config-scheduler-profile)#shaping-rate 100000 burst 10 milliseconds
host1(config-scheduler-profile)#exit
Configure the scheduler profile for the video service.
3.
a. Configure the scheduler profile named voice.
b. Configure the shared-shaping rate of 8000000 with a burst of 10 milliseconds.
host1(config)#scheduler-profile video
host1(config-scheduler-profile)#shaping-rate 8000000 burst 10 milliseconds
271