Monitoring The Qos Scheduler Hierarchy; Table 38: Show Drop-Profile Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

Meaning
Related
Documentation

Monitoring the QoS Scheduler Hierarchy

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
drop12 10 0, 750000, 80%
drop13 10 0, 750000, 80%
drop14 10 0, 750000, 80%
drop15 10 0, 750000, 80%
To display information about drop profiles in condensed format:
host1#show drop-profile brief
To display the QoS profiles that reference the drop profile:
host1#show drop-profile rates1 references
Table 38 on page 303 lists the show drop-profile command output fields.

Table 38: show drop-profile Output Fields

Field Name
drop profile
Average length exponent
committed threshold
conformed threshold
exceeded threshold
Configuring RED on page 27
Configuring WRED on page 30
show drop-profile
Display information about the QoS scheduler hierarchy, including interfaces, resources,
and shaping rates on a particular interface. Phantom nodes are not displayed in the
output for this command.
If you do not specify the traffic-class-group keyword, the output displays information
for the default traffic-class group.
To display the scheduler hierarchy for a particular interface:
host1# show qos scheduler-hierarchy interface fastEthernet 9/0
Scheduler hierarchy for the default traffic-class group
Chapter 31: Monitoring QoS on E Series Routers
0, <none>, <none>
0, <none>, <none>
0, <none>, <none>
0, <none>, <none>
Field Description
Name of the drop profile
Exponent used to weight the average queue length
over time, controlling WRED responsiveness
Minimum and maximum committed queue thresholds
and maximum drop probability
Minimum and maximum conformed queue thresholds
and maximum drop probability
Minimum and maximum exceeded queue thresholds
and maximum drop probability
shaping shaping
0, <none>, <none>
0, <none>, <none>
0, <none>, <none>
0, <none>, <none>
assured
shared rate
or
303