Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual page 266

JunosE 11.3.x Quality of Service Configuration Guide
236
This QoS profile references the scheduler profiles, which then reference the
parameter instances max-subscriber-bandwidth and subscriber-weight. These
global parameter instances are created with values 2 Mbps and 1.
Configure a basic triple-play service consisting of voice, video, and data services for
2.
Subscriber 2.
a. Specify the Fast Ethernet interface in slot 9, port 0.
b. Create a parameter instance for max-subscriber-bandwidth, enabling the subscriber
to transmit up to 6 Mbps of combined voice, video, and data traffic.
c. Create a parameter instance for subscriber-weight with a value of 3. This value
enables the subscriber to claim up to three times the bandwidth of Subscriber 1,
with basic data service.
d. Create a parameter instance for max-subscriber-video-bandwidth, limiting video
traffic to 2 Mbps.
e. Create a parameter instance for max-100Kbps-voice-calls, enabling bandwidth
for one 100 Kbps voice call.
f. Attach the QoS profile subscriber-triple-play to the subscriber's interface.
host1(config)#interface fastEthernet 9/0.2
host1(config-if)#qos-parameter max-subscriber-bandwidth 6000000
host1(config-if)#qos-parameter subscriber-weight 3
host1(config-if)#qos-parameter max-subscriber-video-bandwidth 2000000
host1(config-if)#qos-parameter max-100Kbps-voice-calls 1
host1(config-if)#qos-profile subscriber-triple-play
host1(config-if)#exit
Configure a enhanced triple-play service consisting of voice, video, and data services
3.
for Subscriber 3. Enable the subscriber to have twice as much bandwidth as Subscriber
2, with basic triple-play service.
a. Create a parameter instance for max-subscriber-bandwidth, enabling the subscriber
to transmit up to 8 Mbps of combined voice, video, and data traffic.
b. Create a parameter instance for subscriber-weight with a value of 6, enabling the
subscriber to claim up to six times the bandwidth of Subscriber 1, with basic data
service.
c. Create a parameter instance for max-subscriber-video-bandwidth, limiting video
traffic to 3 Mbps.
d. Create a parameter instance for max-100Kbps-voice-calls, enabling up to three
100 Kbps voice calls.
e. Attach the QoS profile subscriber-triple-play to the subscriber's interface.
host1(config)#interface fastEthernet 9/0.3
host1(config-if)#qos-parameter max-subscriber-bandwidth 8000000
host1(config-if)#qos-parameter subscriber-weight 6
host1(config-if)#qos-parameter max-subscriber-video-bandwidth 3000000
host1(config-if)#qos-parameter max-100Kbps-voice-calls 3
Copyright © 2010, Juniper Networks, Inc.