Figure 34: Case 1: Explicit Constituent Selection With Weighted Constituents; Table 12: Bandwidth Allocation For Case 1 Explicit Constituents - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

Figure 34: Case 1: Explicit Constituent Selection with Weighted Constituents

Copyright © 2010, Juniper Networks, Inc.
Chapter 13: Configuring Implicit and Explicit Constituent Selection for Shaping
In Case 1, scheduler profile A associates the shared-shaping rate with the VLAN 1
best-effort queue. Table 12 on page 113 lists the explicit constituents of the shared shaper
and the bandwidth allocated to each constituent:

Table 12: Bandwidth Allocation for Case 1 Explicit Constituents

Explicit Constituent
VLAN 1 TC voice1 queue
VLAN 1 TC voice2 queue
VLAN 1 TC video queue
VLAN 1 TC data queue
VLAN 1 TC best-effort queue
Figure 35 on page 114 illustrates another case where scheduler profiles B, X, Y, and Z are
applied to scheduler objects. Each profile assigns a weight to an explicit constituent.
Bandwidth Allocation
Strict constituent that can consume up to its legacy
shaping-rate.
Weighted constituent that shares bandwidth with its weighted
shared shaper siblings in a proportion of 4/10.
Weighted constituent that shares bandwidth with its weighted
shared shaper siblings in a proportion of 3/10.
Weighted constituent that shares bandwidth with its weighted
shared shaper siblings in a proportion of 2/10.
Weighted constituent that shared bandwidth with weighted
shared shaper siblings in a proportion of 1/10.
113