Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual page 304

JunosE 11.3.x Quality of Service Configuration Guide
Related
Documentation
274
exit
! Create the cell-mode QoS parameter definition.
qos-parameter-define cell-mode application qos-cell-mode
controlled-interface-type vlan
controlled-interface-type ip
exit
! Configure the vc1 and vc2 scheduler profiles.
scheduler-profile vc1
shared-shaping-rate 10000000 burst 10 milliseconds
exit
scheduler-profile voice
shaping-rate 100000 burst 10 milliseconds
exit
scheduler-profile video
shaping-rate 8000000 burst 10 milliseconds
exit
scheduler-profile vc2
shaping-rate 1000000 burst 10 m
exit
! Add the scheduler profiles to the vc1 QoS profile.
qos-profile vc1
vlan node scheduler-profile vc1
vlan queue traffic-class voice schedule-profile voice
vlan queue traffic-class video schedule-profile video
exit
qos-profile vc2
vlan node scheduler-profile vc2
! Configure the byte adjustment for VLAN1 and VLAN2.
interface gigabitEthernet 6/0/0
encapsulation vlan
interface gigabitEthernet 6/0/0.1
vlan id 1
qos-parameter byte-adjustment -28
qos-parameter cell-mode 1
qos-profile vc1
interface gigabitEthernet 6/0/1.1
vlan id 2
qos-parameter byte-adjustment -2
qos-parameter cell-mode 1
qos-profile vc2
Cell Shaping Mode Using QoS Parameters Overview on page 265
Copyright © 2010, Juniper Networks, Inc.