Attaching A Qos Profile To An Interface Superset; Attaching A Qos Profile To An Interface Set - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

JunosE 11.3.x Quality of Service Configuration Guide

Attaching a QoS Profile to an Interface Superset

Attaching a QoS Profile to an Interface Set

Related
Documentation
206
host1(config-qos-profile)#superset queue traffic-class video
For interface sets:
host1(config-qos-profile)#set queue traffic-class video
Specify an interface superset or an interface set as a node.
3.
For interface supersets:
host1(config-qos-profile)#superset node scheduler-profile video
For interface sets:
host1(config-qos-profile)#set node scheduler-profile video
To attach a QoS profile to an interface superset:
Specify the QoS interface superset.
1.
host1(config)#qos-interface-superset vlan-superset
Attach the QoS profile.
2.
host1(config-qos-interface-superset)#qos-profile business-data
To attach a QoS profile to an interface set:
Specify the QoS interface set.
1.
host1(config)#qos-interface-superset vlan-set
Attach the QoS profile.
2.
host1(config-qos-interface-set)#qos-profile business-data
Monitoring the QoS Profiles Attached to an Interface on page 320
Monitoring the QoS Scheduler Hierarchy on page 303
Monitoring Shared Shapers on page 310
node
qos-interface-set
qos-interface-superset
qos-profile
queue
Copyright © 2010, Juniper Networks, Inc.