Creating A Qos Parameter Instance For An Interface Set; Attaching A Qos Profile To An Interface Superset Or An Interface Set; Configuring A Qos Profile For An Interface Superset Or An Interface Set - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

Creating a QoS Parameter Instance for an Interface Set

Related
Documentation

Attaching a QoS Profile to an Interface Superset or an Interface Set

Configuring a QoS Profile for an Interface Superset or an Interface Set

Copyright © 2010, Juniper Networks, Inc.
To create a QoS parameter instance for an interface set:
Specify the QoS interface set.
1.
host1(config)#qos-interface-set vlan-set
Create the QoS parameter instance.
2.
host1(config-qos-interface-set)#qos-parameter business-data
Attach the QoS profile.
3.
host1(config-qos-interface-set)#qos-profile vlan
Monitoring the QoS Profiles Attached to an Interface on page 320
Monitoring the QoS Scheduler Hierarchy on page 303
Monitoring Shared Shapers on page 310
controlled-interface-type
instance-interface-type
qos-interface-set
qos-interface-superset
qos-parameter
qos-profile
You can configure a QoS profile to manage the scheduler resources for an interface set
or an interface superset.
Tasks to attach a QoS profile to an interface set or an interface set include:
Configuring a QoS Profile for an Interface Superset or an Interface Set on page 205
Attaching a QoS Profile to an Interface Superset on page 206
Attaching a QoS Profile to an Interface Set on page 206
To configure a QoS profile to manage the scheduler resources for an interface superset
or an interface set:
Configure the QoS profile.
1.
hos1(config)#qos-profile vlan
Specify an interface superset or an interface set as a queue.
2.
For interface supersets:
Chapter 23: Configuring Interface Sets for QoS
205