Example: Qos Parameter Configuration For Ip Multicast Bandwidth - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

JunosE 11.3.x Quality of Service Configuration Guide
Related
Documentation
256
b. Configure a controlled-interface type.
host1(config-qos-parameter-define)#controlled-interface-type vlan
host1(config-qos-parameter-define)#exit
Create a parameter instance that globally defines the value of the IP multicast
3.
adjustment as 0.
host1(config)#qos-parameter ipm 0
Reference the parameter within a scheduler profile parameter expression.
4.
host1(config)#scheduler-profile vlan-subscriber
host1(config-scheduler-profile)#shared-shaping-rate 1000000 - ipm burst 50
milliseconds auto
host1(config-scheduler-profile)#exit
Add the scheduler profile to a QoS profile.
5.
host1(config)#qos-profile vlan-subscriber
host1(config-qos-profile)#vlan queue traffic-class best-effort
host1(config-qos-profile)#vlan queue traffic-class voice scheduler-profile 192k
host1(config-qos-profile)#vlan node scheduler-profile vlan-subscriber
host1(config-qos-profile)#exit
Attach the parameter definition to a logical interface.
6.
host1(config)#interface gigabitEthernet 7/0
host1(config-if)#encapsulation vlan
host1(config-if)#exit
host1(config)#interface gigabitEthernet 7/0.1
host1(config-if)#vlan id 200
host1(config-if)#qos-profile vlan-subscriber
host1(config-if)#ip address 1.1.1.1 255.255.255.0
After the QoS profile is attached to the interface, the IP multicast bandwidth adjustment
application begins to adjust rates based on IGMP joins and leaves received on that
interface.
IP Multicast Bandwidth Adjustment for QoS Overview on page 253
Example: QoS Parameter Configuration for IP Multicast Bandwidth Adjustment on
page 257
controlled-interface-type
encapsulation vlan
interface gigabitEthernet
node
qos-parameter-define
qos-profile
queue
scheduler-profile
shared-shaping-rate
Copyright © 2010, Juniper Networks, Inc.