Figure 35: Case 2: Explicit Constituent Selection With Weighted Constituents; Table 13: Bandwidth Allocation For Case 2 Explicit Constituents - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

JunosE 11.3.x Quality of Service Configuration Guide

Figure 35: Case 2: Explicit Constituent Selection with Weighted Constituents

Related
Documentation
114
In Case 2, scheduler profile B associates the shared-shaping rate with the best-effort
node for VLAN 1. Table 13 on page 114 lists the explicit constituents of the shared shaper
and the bandwidth allocated to each constituent:

Table 13: Bandwidth Allocation for Case 2 Explicit Constituents

Explicit Constituent
VLAN 1 TC voice1 queue
VLAN 1 TC voice2 queue
VLAN 1 TC video queue
Best-effort node for VLAN 1
Configuring Explicit Constituents for Simple or Compound Shared Shaping on page 115
Bandwidth Allocation
Strict constituent that can consume up to its legacy
shaping-rate.
Weighted constituent that shares bandwidth with its weighted
shared shaper siblings in a proportion of 4/10.
Weighted constituent that shares bandwidth with its weighted
shared shaper siblings in a proportion of 3/10.
Weighted constituent that shared bandwidth with weighted
shared shaper siblings in a proportion of 3/10.
NOTE: The node is selected as the constituent when both the
node and the queues stacked over node are specified in a
scheduler profile.
Copyright © 2010, Juniper Networks, Inc.