Monitoring The Configuration Of Qos Interface Supersets; Table 53: Show Qos-Interface-Set Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

Meaning
Related
Documentation

Monitoring the Configuration of QoS Interface Supersets

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
Table 53 on page 331 lists the show qos-interface-set command output fields.

Table 53: show qos-interface-set Output Fields

Field Name
interface set
parent
port
member type
restricted interface
Children
Configuring Interface Sets for QoS on page 201
show qos-interface-set
Display information about configured interface supersets.
To display information about a specific interface superset:
host1#show qos-interface-superset vlan-ss
interface member restricted
superset port count
--------- --------- ------ ----------
vlan-ss lag test1 1
To display detailed information about a specific interface superset:
host1#show qos-interface-superset vlan-ss detail
interface member restricted
superset port count
--------- --------- ------ ----------
vlan-ss lag test1 1
Children:
set set
Table 54 on page 332 lists the show qos-interface-superset command output fields.
Chapter 31: Monitoring QoS on E Series Routers
Field Description
Name of the interface set
Name of the interface superset that is the parent of
the interface set
Interface that is the parent of the interface superset
Member-interface type defined for the interface set:
vlan
ip
vlan
Restricted interface configured for this interface set
List of interface members associated with the
interface superset
interface
none
interface
none
331