Monitoring Forwarding And Drop Events On The Egress Queue; Table 43: Show Egress-Queue Events Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

Software for e series broadband services routers quality of service configuration guide
Table of Contents

Advertisement

Related
Documentation

Monitoring Forwarding and Drop Events on the Egress Queue

Purpose
Action
host1# show egress-queue events interface gigabitEthernet 1/0
interface
----------------------
ip GigabitEthernet1/0
Meaning
Copyright © 2010, Juniper Networks, Inc.
Configuring Simple Shared Shaper Algorithm Variables on page 89
show qos-shared-shaper-control
Display information about forwarding and drop event counts on the egress queue.
To display events for a specific interface:
committed
traffic
forwarded
drop
class
events
events
-------
---------
---------
tc1
132
tc2
132
tc3
6
tc4
0
To display events for an L2TP session:
host1#show egress-queue events l2tp-session session1
To display events for a tunnel interface, specify the interface at the root of the scheduler
hierarchy located on the tunnel-service interface or at the same hierarchy for LNS GRE
tunnel traffic:
host1#show egress-queue events tunnel-server 6/0
To display events for queues only on the specified interface and not stacked above the
interface:
host1#show egress-queue events gigabitEthernet 1/0 explicit
To display the sum of events for the queues bound to interfaces that are stacked above
the specified interface:
host1#show egress-queue events gigabitEthernet 1/0 summary
To display events for queues belonging to a specific traffic class:
host1#show egress-queue events gigabitEthernet 1/0 traffic-class voice
To filter output based on the number of events that exceed the specified value.
host1#show egress-queue events gigabitEthernet 1/0 event-exceeding committed
host1#show egress-queue events gigabitEthernet 1/0 event-exceeding conformed
host1#show egress-queue events gigabitEthernet 1/0 event-exceeding exceeded
host1#show egress-queue events gigabitEthernet 1/0 event-exceeding forwarded
Table 43 on page 313 lists the show egress-queue events command output fields.

Table 43: show egress-queue events Output Fields

Field Name
interface
Chapter 31: Monitoring QoS on E Series Routers
conformed
exceeded
drop
drop
events
events
---------
---------
0
0
132
0
0
132
0
0
132
Field Description
Name of the interface
rate
period
count
---------
0
132
0
132
0
132
132
313

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents