Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual page 312

JunosE 11.3.x Quality of Service Configuration Guide
Related
Documentation
282
If the user packet size changes, you must change the expression value and
the byte adjustment value.
To ensure that the router handles the byte adjustment value consistently for VDSL
5.
and ADSL networks, apply the QoS parameter for frame shaping mode globally.
host1(config)#qos-parameter frame-byte 8
NOTE: The ancp-downstream rate and sp-qos-cell-mode QoS parameters
are dynamically applied to QoS by ANCP.
Byte Adjustment for ADSL and VDSL Traffic Overview on page 275
qos-parameter
qos-parameter-define
qos-profile
scheduler-profile
shaping-rate
Copyright © 2010, Juniper Networks, Inc.