Complete Configuration Example - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

Software for e series broadband services routers quality of service configuration guide
Table of Contents

Advertisement

JunosE 11.3.x Quality of Service Configuration Guide

Complete Configuration Example

262
host1#show egress-queue rates interface atm 2/0.1
traffic
interface
class
--------------- ----------- --------- --------- ------- --------
atm-vc ATM2/0.1 voice
ip ATM2/0.1
best-effort
Queues reported:
Queues filtered (under threshold):
* Queues disabled (no rate period):
**Queues disabled (no resources):
Total queues:
To display the shared shaper settings for the ATM VC on the ATM interface in slot 2,
9.
port 0, issue the show qos shared-shaper command.
host1#show qos shared-shaper interface atm 2/0.1
interface
--------------- ------------------------ -------- ------- -------------
atm-vc ATM2/0.1 A atm-vc node
A atm-vc queue EF voice
Total shared shapers:
Total constituents:
Total shared shaper failovers: 0
Compound shared shapers are supported.
You can use the complete configuration examples provided for each of the configurations
in your own network. To customize the configuration example for your needs, copy the
text into a text editor, and modify it.
To use the example for immediate use, copy it to the local console or Telnet session from
which you access the router.
You can also save the example as a script (.scr) file that executes the commands as
though they were entered at the terminal. For information about executing .scr files, see
JunosE System Basics Configuration Guide.
From Global Configuration mode:
! Create the voice traffic class.
traffic-class voice
exit
traffic-class best-effort
exit
traffic-class-group EF auto-strict-priority
traffic-class best-effort
exit
! Create the ipm QoS parameter definition.
qos-parameter-define ipm application ip-multicast hierarchical
controlled-interface-type atm-vc
exit
! Create a global parameter instance of the ipm QoS parameter.
qos-parameter ipm 0
! Configure the vc-subscriber and 192K scheduler profiles.
forwarded aggregate minimum maximum
rate
drop rate
0
0
0
0
2
0
0
0
2
shared
shaping
resource
rate
10000000
1
2
Copyright © 2010, Juniper Networks, Inc.
rate
rate
192000
192000
0 10000000
shaping
rate
other
rate 10000000
192000

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents