Related
Documentation
Monitoring the Configuration of Scheduler Profiles
Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Table 39: show qos scheduler-hierarchy Output Fields
Field Name
interface
resource
shaping rate
shared shaping rate
assured rate or weight
Configuring a Scheduler Hierarchy on page 47
Configuring Simple Shared Shaping on page 77
Configuring Compound Shared Shaping on page 96
Configuring Interface Sets for QoS on page 201
Configuring Interface Supersets for QoS on page 200
show qos scheduler-hierarchy
Display information about scheduler profiles. If you do not specify the scheduler profile
name, data for all scheduler profiles is displayed.
You can display the values that you configured using a QoS parameter for assured rate,
shaping rate, and shared-shaping rate.
To display information about all scheduler profiles:
host1#show scheduler-profile
shaping
scheduler
rate
burst
---------
-------
-----
default
<none>
32767
wf100
128000
32767
spSV25
5000000
32767
videoHar
<none>
32767
To display the number of times that a QoS profile references the scheduler profile:
host1#show scheduler-profile brief
scheduler-profile default referenced 39 times in qos-profiles
scheduler-profile wf100 referenced 1 time in qos-profiles
scheduler-profile spSV25 referenced 2 times in qos-profiles
To display a list of QoS profiles that reference the scheduler profile:
Chapter 31: Monitoring QoS on E Series Routers
Field Description
Type of interface
Traffic resource associated with the logical interface
Individual shaping rate of a traffic resource in bits per
second
Configured shared-shaping rate in bits per second
Configured assured rate in bits per second or
configured weight
strict
weight
priority
assured rate
------
--------
------------
8
no
<none>
20
no
75000
40
no
64000
8
no
hierarchical
309
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 and is the answer not in the manual?