Novell GROUPWISE 8 - INTEROPERABILITY Manual page 77

2 Arrange the nodes in the cluster into the desired failover path for the Internet Agent volume
(Internet Agent Clustering Worksheet item
3 Click Apply to save the failover path.
4 Click Policies to display the default start, failover, and failback policies.
The default policy settings are often appropriate. By default, a volume resource:
Fails over automatically if the node it is running on fails
Starts automatically on the next node in its failover path
Continues running at its failover location, even after its most preferred node is again
available
If you are considering changing these defaults, see the applicable section about failover and
failback modes in the cluster documentation for your version of NetWare, as listed in
Chapter 1, "Introduction to GroupWise 8 and Novell Cluster Services on NetWare," on
page 19.
5 Click OK when you are finished editing the Internet Agent volume resource properties.
6 Continue with Enabling Internet Addressing for Your Clustered GroupWise
3).
Implementing the Internet Agent in a NetWare Cluster
System.
77