Planning The Mta Installation; Planning The Internet Agent Installation; Setting Up The Internet Agent In A Cluster; Cluster-Enabling A Shared Volume For Use With The Internet Agent - Novell GROUPWISE 8 - INTEROPERABILITY Manual

4.1.8 Planning the MTA Installation

Follow the instructions in
point. After you follow the instructions, you have a filled-out NetWare Agent Worksheet to use
when you install the MTA.
IMPORTANT: Do not install the NetWare MTA until you are instructed to do so in
"Setting Up the Internet Agent in a Cluster," on page

4.1.9 Planning the Internet Agent Installation

Aside from the cluster-specific issues discussed in the preceding sections, the considerations
involved in planning to install the Internet Agent are the same in a clustering environment as for any
other environment. Review the installation instructions in
Internet Agent Software" in
Installation Guide. You might want to print this section and write down the types of planning
information you have provided on worksheets in other sections. You will need this information as
you install the Internet Agent in your cluster.
IMPORTANT: Do not install the Internet Agent software until you are instructed to do so in
Section 4.2, "Setting Up the Internet Agent in a Cluster," on page

4.2 Setting Up the Internet Agent in a Cluster

You should already have reviewed
page 67 and filled out the
now ready to complete the following tasks to set up the Internet Agent in a clustering environment:
Section 4.2.1, "Cluster-Enabling a Shared Volume for Use with the Internet Agent," on page 71
Section 4.2.2, "Creating a Domain for the Internet Agent," on page 72
Section 4.2.3, "Installing the MTA for the Internet Agent Domain," on page 72
Section 4.2.4, "Installing and Configuring the Internet Agent in a Cluster," on page 72
Section 4.2.5, "Testing the Clustered Internet Agent," on page 79
4.2.1 Cluster-Enabling a Shared Volume for Use with the
Internet Agent
To cluster-enable the Internet Agent shared volume:
1 Complete the cluster-enabling steps in the applicable section of the cluster documentation for
your version of NetWare, as listed in
Cluster Services on NetWare," on page
The Internet Agent Clustering Worksheet provides the volume to cluster-enable, the cluster-
enabled volume IP address, and the failover path for the Internet Agent volume.
For a review of the new Novell
a shared volume, see
Used by GroupWise," on page
"Planning the NetWare Agent Installation" on page
"Installing the GroupWise Internet
Section 4.1, "Planning the Internet Agent in a Cluster," on
Section 4.4, "Internet Agent Clustering Worksheet," on page
Chapter 1, "Introduction to GroupWise 8 and Novell
19.
®
eDirectory
TM
Section 2.6, "Deciding Whether to Cluster-Enable the Shared Volumes
25.
71.
"NetWare and Windows: Installing the
Agent" in the
71.
objects that are created when you cluster-enable
Implementing the Internet Agent in a NetWare Cluster
34, then return to this
Section 4.2,
GroupWise 8
82. You are
71