Configuring Groupwise Cluster Resources To Load And Unload The Agents - Novell GROUPWISE 8 - INTEROPERABILITY Manual

14.4.3 Configuring GroupWise Cluster Resources to Load and
Unload the Agents
The properties of the Cluster Resource object associated with the
partitions function within the cluster, how agents are loaded and unloaded, and how failover and
failback situations are handled. At this point, you might have one cluster resource for a GroupWise
partition with a domain and post office on it, or you might have two cluster resources for two
GroupWise partitions, one for the domain and one for the post office. Complete the following tasks
for each cluster resource:
"Modifying the Cluster Resource Load Script for the Agents" on page 146
"Modifying the Cluster Resource Unload Script for the Agents" on page 149
"Setting the Failover List and Policies for the Agents" on page 151
Modifying the Cluster Resource Load Script for the Agents
The cluster resource load script executes whenever the
Linux, all cluster management activities are performed in Novell iManager.
To set up the load script in iManager:
1 Expand Clusters, then click Cluster Options.
2 In the Cluster field, browse to the Cluster object where the GroupWise cluster resource is
located.
3 Click the Cluster object to display the cluster resources that belong to the cluster.
146 GroupWise 8 Interoperability Guide
GroupWise partition
GroupWise partition comes online. On OES
define how