Planning A New Clustered Domain - Novell GROUPWISE 8 - INTEROPERABILITY Manual

SYSTEM CLUSTERING WORKSHEET
If you want to have your GroupWise software distribution directory as part of your cluster, under
6: GroupWise Partition for Software Distribution
secondary IP address for the software distribution directory. List the full path for the software
distribution directory, regardless of whether it is located on a GroupWise partition or on each node in
the cluster.

13.3 Planning a New Clustered Domain

The considerations involved in planning a new domain in a clustering environment are essentially
the same as for any other environment.
Primary Domain: If you are setting up a new GroupWise system in a clustering environment,
you are creating the primary domain as you complete the tasks in this section. To prepare,
review
System Summary
Installation
primary domain.
Secondary Domain: If your GroupWise system already exists, you are creating a new
secondary domain. To prepare, review
"Domain
Regardless of the type of domain you are creating, keep in mind the following cluster-specific
details as you fill out the worksheet you need:
When you specify the location for the domain directory (and for a new GroupWise system, the
post office directory) on the worksheet, remember that it will be on a
on the node where you will be running the GroupWise Installation program.
Do not concern yourself with the GroupWise agent information on the worksheet. You will
plan the agent installation later. If you are filling out the Basic GroupWise System Worksheet,
stop with
Administrator.
When you have completed the worksheet, transfer the key information from the Basic GroupWise
System Worksheet or the Domain Worksheet to the System Clustering Worksheet.
SYSTEM CLUSTERING WORKSHEET
Under Item 9: Domain
Clustering Worksheet.
Under Item 7: GroupWise Partition for
Worksheet. Also specify the secondary IP address of the shared partition where you plan to create
the domain.
IMPORTANT: Do not create the new domain until you are instructed to do so in
"Setting Up a Domain and a Post Office in a Linux Cluster," on page
130 GroupWise 8 Interoperability Guide
"Planning a Basic GroupWise
Sheet" in "Installing a Basic GroupWise
Guide. This covers planning the primary domain and an initial post office in the
Worksheet" in "Domains" in the
Post Office Settings. If you are filling out the Domain Worksheet, stop with
Name, transfer the domain name and database directory to the System
Domain, transfer the domain location to the System Clustering
Directory, list the GroupWise partition and associated
System", then print and fill out the
System" in the
"Planning a New Domain", then print and fill out the
GroupWise 8 Administration
Item
"Basic GroupWise
GroupWise 8
Guide.
GroupWise partition, not
Domain
Chapter 14,
137.