Novell GROUPWISE 8 - INTEROPERABILITY Manual page 189

5 Repeat
Step 1 through
6 Continue with "Configuring Clustered Logging" on page 189
Configuring Clustered Logging
The default location for the WebAccess Agent log files is on the cluster nodes along with the
WebAccess Agent software, rather than being located with the domain on the WebAccess Agent
partition. To avoid having multiple copies of log files in multiple locations, you should set the
location in ConsoleOne.
1 On the WebAccess Agent partition where the domain is located, create the directory where you
want to store WebAccess Agent log files.
2 In ConsoleOne, browse to and select the Domain object.
3 Right-click the WebAccess Agent object, then click Properties.
4 Click GroupWise > Log Settings.
5 In the Log File Path field, browse to and select the directory you created in
OK.
6 If you want the WebAccess Agent to use SSL connections, continue with
Clustered WebAccess Agent for SSL
or
Skip to "Configuring the WebAccess Agent Cluster Resource to Load and Unload the
WebAccess Agent and Its MTA" on page
Configuring the Clustered WebAccess Agent for SSL
If you plan to enable SSL, as described in
"WebAccess" in the GroupWise 8 Administration
and key file available to the WebAccess Agent in the cluster. The default locations for the SSL
certificate file and key file are on the cluster nodes along with the WebAccess Agent software, rather
than being located with the domain on a GroupWise partition. To avoid having multiple copies of
these files in multiple locations, you should set the locations in ConsoleOne
1 On the WebAccess Agent partition, create the directory where you want to store the certificate
and key file required for SSL.
2 Copy the certificate file and key file into the new directory.
If you need assistance obtaining these files, see
"Security Administration" in the
3 In ConsoleOne, browse to and select the Domain object.
4 Right-click the WebAccess Agent object, then click Properties.
5 Click GroupWise > SSL Settings.
6 In the Certificate File field, browse to and select the certificate file.
7 In the SSL Key File field, browse to and select the key file.
8 Click OK.
9 After you have set these locations to the WebAccess Agent partition, continue with
Configuring the WebAccess Agent Cluster Resource to Load and Unload the WebAccess
Agent and Its MTA.
Step 4for each node in the WebAccess Agent failover list.
190.
"Securing WebAccess Agent Connections with
Guide, you need to make the SSL certification file
GroupWise 8 Administration
®
.
"Server Certificates and SSL
Guide.
Implementing WebAccess in a Linux Cluster 189
Step 1, then click
Configuring the
SSL" in
Encryption" in