Creating A Domain For The Webaccess Agent; Installing The Mta For The Webaccess Agent Domain; Installing The Webaccess Agent In A Cluster - Novell GROUPWISE 8 - INTEROPERABILITY Manual

36.3.2 Creating a Domain for the WebAccess Agent

The WebAccess Agent domain will be a secondary domain. To create it, follow the instructions in
Section 34.3, "Creating a New Secondary Domain in a Cluster," on page
information from the WebAccess Clustering Worksheet, rather than the System Clustering
Worksheet, then return to this point.
Do not create any post offices in the WebAccess Agent domain.
Continue with

36.3.3 Installing the MTA for the WebAccess Agent Domain

The MTA for the WebAccess Agent domain can be installed just like any other MTA in your
clustered GroupWise system. Follow the instructions in
on page 299, then return to this point.
You do not need to edit the MTA startup file.
Continue with

36.3.4 Installing the WebAccess Agent in a Cluster

After you have created a domain for the WebAccess Agent and installed the MTA for that domain,
you are ready to install and configure the WebAccess Agent. The WebAccess Agent is the
component of your WebAccess installation that accesses post offices and libraries to retrieve
information for WebAccess client users.
1 Map a drive to the shared disk of the WebAccess resource group
Worksheet item
2 Map a drive to
as a Windows service
3 If you plan to install the WebAccess Agent software to the shared disk of the WebAccess
resource group
drive:\grpwise\webacc
or
If you plan to install the WebAccess Agent software to each node in the cluster, create the
c:\grpwise\webacc
4 Start the WebAccess Installation program, following the steps provided in
WebAccess
Guide.
5 Install the Windows WebAccess Agent, keeping in mind the following cluster-specific details:
On the Components page select only GroupWise WebAccess Agent.
Do not install the WebAccess Application at this time.
Use items 2 through 12 on the GroupWise WebAccess Installation Worksheet that you
filled out in
the WebAccess Agent installation process.
On the Installation Path page, be sure to browse through the mapped drive to the
installation directory you created in
320 GroupWise 8 Interoperability Guide
Installing the MTA for the WebAccess Agent
Installing the WebAccess Agent in a
1).
on the first node in the cluster where you will set up the WebAccess Agent
c:\
(System Clustering Worksheet item
(WebAccess Clustering Worksheet item
directory on the WebAccess shared disk accessed in
directory on the drive accessed in
Agent" in "Installing GroupWise
"Planning the WebAccess Installation" on page 318
Domain.
"Installing the Agent Software in a Cluster"
Cluster.
(WebAccess Clustering
2).
5), create the
Step 2.
WebAccess" in the GroupWise 8 Installation
Step 3 above.
296, taking your
Step 1.
"Installing the
to fill in the fields during