Novell GROUPWISE 8 - INTEROPERABILITY Manual page 51

If you selected
sys:\system
Worksheet item 1) but you are storing the agent startup files on the GroupWise volume,
add that location to the server search path.
If you marked No under Load Agents in Protected Memory?
item 8), add the following abend recovery options:
set auto restart after abend = 2
set auto restart after abend delay time = 0
set auto restart down timeout = 60
set developer option = off
These settings provide the best possible handling of GroupWise databases in the event that
an abend should occur within the cluster when the agents are not running in protected
memory.
Transfer the agent
Ctrl+C to copy and Ctrl+V to paste text into the load script page. Then delete or rename
the
grpwise.ncf
load volume:\system\agent.nlm @startup_file
If you marked Yes under Load Agents in Protected Memory?
Worksheet item 8), add the address space parameter to the agent
specify the protected address space for each agent. Add a
command for each address space name.
load address space=addr_space_name
protection restart name
The result would look similar to the following example:
NOTE: The commands are needed in the load script only when the agents are not running
set
in protected memory. The address space parameters are needed in the
when the agents are running in protected memory.
4 Click Apply to save the load script.
on each node as the installation location
commands from the
load
file to avoid future confusion.
volume:\system\agent.nlm @startup_file
Setting Up a Domain and Post Office in a NetWare Cluster
(Agent Clustering Worksheet
file into the load script. Use
grpwise.ncf
(Agent Clustering
load
protection restart
load
(Agent Clustering
commands to
commands only
51