Managing The Webaccess Agent In A Linux Cluster; Updating Groupwise Objects With Cluster-Specific Descriptions - Novell GROUPWISE 8 - INTEROPERABILITY Manual

/etc/init.d/grpwise status webac80a
5 Select the new WebAccess Agent cluster resource, then click Offline.
The State column for the WebAccess Agent cluster resource returns to Offline.
6 Use the same command that you used in
stopped.
7 Repeat
permanently.
8 Continue with
16.5 Managing the WebAccess Agent in a Linux
Cluster
After you have installed the WebAccess Agent in a cluster, you should consider some long-term
management issues.
Section 16.5.1, "Updating GroupWise Objects with Cluster-Specific Descriptions," on
page 196
Section 16.5.2, "Knowing What to Expect in a WebAccess Agent Failover Situation," on
page 197
16.5.1 Updating GroupWise Objects with Cluster-Specific
Descriptions
After installing the WebAccess Agent in your clustered GroupWise system, while the cluster-
specific information is fresh in your mind, you should record the cluster-specific information as part
of the GroupWise objects in ConsoleOne so that you can easily refer to it later. Be sure to update the
information in the GroupWise objects if the configuration of your system changes.
"Recording Cluster-Specific Information about the WebAccess Agent Domain and Its MTA"
on page 196
"Recording Cluster-Specific Information about the WebAccess Agent" on page 197
Recording Cluster-Specific Information about the WebAccess Agent Domain and Its
MTA
To permanently record important cluster-specific information for the WebAccess Agent domain:
1 In ConsoleOne, browse to and right-click the Domain object, then click Properties.
2 In the Description field of the WebAccess Agent domain Identification page, provide a cluster-
specific description of the WebAccess Agent domain, including the secondary IP address of its
GroupWise
3 Click OK to save the WebAccess Agent domain description.
4 Select the Internet Agent Domain object to display its contents.
5 Right-click the MTA object, then click Properties.
6 In the Description field of the MTA Identification page, record the secondary IP address of the
GroupWise partition.
196 GroupWise 8 Interoperability Guide
Step 2 whenever you are ready to bring the new Internet Agent cluster resource online
Managing the WebAccess Agent in a Linux
partition.
Step 4 to verify that the WebAccess Agent has
Cluster.