Testing The Clustered Internet Agent - Novell GROUPWISE 8 - INTEROPERABILITY Manual

Verifying Post Office Links
In the Internet Agent object properties pages:
1 Click Post Office Links.
2 Verify that the Access Mode column displays C/S (for client/server mode) for all post offices
serviced by the Internet Agent.
3 Verify that the Links column displays the secondary IP addresses of the GroupWise volumes
where post offices reside, not the IP addresses of any physical servers in the cluster.
4 Make changes if necessary.
5 Continue with
Forcing Use of the Internet Agent Secondary IP
Forcing Use of the Internet Agent Secondary IP Address
If you want the Internet Agent to send outgoing messages on its secondary IP address, rather than
using the default of its primary IP address:
1 Click GroupWise > Network Address.
2 In the TCP/IP Address field, provide the secondary IP address (under
Worksheet item 1) for the Internet Agent to use for sending outgoing messages.
3 Click SMTP/MIME, then click Settings.
4 Select Bind to TCP/IP Address at Connection Time.
5 Click OK.
6 Continue with Testing the Clustered Internet

4.2.5 Testing the Clustered Internet Agent

After you have configured the Internet Agent volume resource, you can test the load and unload
scripts by bringing the Internet Agent volume online and taking it offline again.
1 In ConsoleOne, select the Cluster object, then click View > Cluster State.
The new Internet Agent volume resource shows Offline in the State column.
2 Click the new Internet Agent volume resource, then click Online.
Address.
Internet Agent Clustering
Agent.
Implementing the Internet Agent in a NetWare Cluster 79