Novell GROUPWISE 8 - INTEROPERABILITY Manual page 47

2 Manually create the post office directory
This step is not required, but in a clustered environment,
directory already exists.
3 In ConsoleOne, connect to the GroupWise domain where you want to create the new post
office, as described in
Administration Guide.
4 Create the new post office, following the steps provided in
"Post Offices" in the GroupWise 8 Administration
specific details:
Use the Post Office Worksheet you filled out in
Post Office," on page 24
box.
In the Post Office Database Location field, be sure to browse through the drive you
mapped in Step 1
If you want to create a library at the post office
select Create Library.
This option creates the document storage area for the library under the post office
directory and is not recommended for large libraries.
The Configure Link option is selected by default. Select TCP/IP Link from Domain to New
Post Office. Refer to the Agent Clustering Worksheet that you filled in during
Secondary IP Addresses and Cluster-Unique Port Numbers for Agents in the Cluster" on
page 29 for the secondary IP address and cluster-unique port numbers that you need to
specify in order to configure the link.
5 Right-click the new Post Office object, then click Properties.
6 Click GroupWise > Post Office Settings; in the Access Mode field, select Client/Server Only.
7 Right-click the new POA object, then click Properties.
On the POA Agent Settings and Scheduled Events pages, you might want to specify unique
times for the following POA activities to prevent multiple POAs from performing the same
activities on the same node at the same time during a failover situation:
Start User Upkeep
Generate Address Book for Remote
Enable QuickFinder Indexing
Mailbox/Library Maintenance Event
For more information about these repetitive POA activities, see
Upkeep", "Regulating
Agent" in the GroupWise 8 Administration
8 Make sure you are still connected to the domain that owns the new post office.
9 Rebuild the post office database for the new post office, following the steps provided in
"Rebuilding Domain or Post Office
Administration Guide. Be sure to browse to the database location
Worksheet item 11) through the virtual server that was created when you cluster-enabled the
GroupWise volume.
(System Clustering Worksheet item
"Connecting to a Domain" in "Domains" in the
to fill in the fields in the Create GroupWise Post Office dialog
to the post office directory you created in
Indexing", and "Scheduling Database
Guide.
Databases" in "Databases" in the
Setting Up a Domain and Post Office in a NetWare Cluster
Step 4 is easier if the post office
GroupWise 8
"Creating the New Post
Guide. Keep in mind the following cluster-
Section 2.4, "Planning a New Clustered
Step 2 above.
(System Clustering Worksheet item
"Performing Nightly User
Maintenance" in
GroupWise 8
(under System Clustering
12).
Office" in
14),
"Planning
"Post Office
47