Novell GROUPWISE 8 - INTEROPERABILITY Manual page 188

All GroupWise agents that you have installed from the software distribution directory are
listed, based on the information stored in the
5 Select the GroupWise agents that you want to configure on the current cluster node, then click
OK.
The Import Clustering Data option performs the following configuration actions for each
subsequent node where you run it:
The
is configured specifically for the agents you just selected.
The GroupWise High Availability service is automatically configured on the current
cluster node and its configuration file (
groupwise
Because the agent startup files and log files are stored on the shared resource, they do not need
to be customized for each cluster node.
6 Repeat
After you install and configure the WebAccess Agent on each node in its failover list, the
cluster node is ready for the WebAccess Agent to fail over to it.
7 Continue with
Testing Your WebAccess Agent Installation on Each Node
1 Test the WebAccess Agent by starting it with a user interface, as described in
Linux WebAccess
Installation
/opt/novell/groupwise/agents/bin/gwinter --show @webac80a.waa &
2 Stop the WebAccess Agent by closing the window that it is running in.
3 After you can see that the WebAccess Agent stopped successfully, test it by starting it as a
daemon, as described in
GroupWise
/etc/inet.d/grpwise start webac80a
/etc/inet.d/grpwise status webac80a
4 Stop the WebAccess Agent.
/etc/inet.d/grpwise stop webac80a
/etc/inet.d/grpwise status webac80a
188 GroupWise 8 Interoperability Guide
script is created in the
grpwise
directory. It is configured specifically for the agents you just selected.
Step 1 through Step 5 for each cluster node in the WebAccess Agent failover list.
Testing Your WebAccess Agent Installation on Each
Agent" in "Installing GroupWise
Guide.
"Starting the Linux GroupWise Agents as
Agents" in the GroupWise 8 Installation
clusterimport.conf
directory on the current cluster node. It
/etc/init.d
) is created in the
gwha.conf
WebAccess" in the
Guide.
file.
/etc/opt/novell/
Node.
"Starting the
GroupWise 8
Daemons" in "Installing