Novell GROUPWISE 8 - INTEROPERABILITY Manual page 226

4 From the options list, enter
5 Specify the mount point for the shared storage.
6 Set up your Messenger system, following the steps provided in
System on
Guide.
7 Continue with
Running the Messenger Installation Program on Subsequent Nodes
1 On the next node in the Messenger failover list
the Messenger partition on the mount point for shared storage.
2 Run the Messenger Installation program.
3 When asked if you are installing to a cluster, enter
4 From the options list, enter
5 Specify the mount point for the shared storage.
The Messenger Installation program then accesses the Messenger files that were created on the
shared storage when the Messenger agents were installed on the preferred node. From these
files, the Messenger Installation program lists the probable configuration for the Messenger
agents you are installing on the current node.
6 Enter
or
Enter
needed.
7 When asked if you want to start the agents, enter
8 Repeat
9 Continue with
Setting Up Non-root Access on NSS Volumes on Each Node
If your cluster uses NSS volumes, as described in
Setup" in the
non- access to those NSS volumes, as described in
root
Volume on Novell Open Enterprise Server
Messenger 2.0 Installation
on Each Node.
Testing Your Messenger Agent Installation on Each Node
1 Test the Messenger agents by starting them as daemons, as described in
Messenger
Installation
/etc/init.d/novell-nmma start
/etc/init.d/novell-nmaa start
/etc/init.d/novell-nmma status
/etc/init.d/novell-nmaa status
2 Stop the Messenger agents.
226 GroupWise 8 Interoperability Guide
for Create a new system.
1
Linux" in "Installing a Novell Messenger
Running the Messenger Installation Program on Subsequent
for Install a new server to an existing system.
2
for Proceed with these settings.
1
for Change the settings, then modify the configuration for the Messenger agents as
2
Step 1 through Step 7 for each node on the Messenger failover list.
Setting Up Non-root Access on NSS Volumes on Each
OES Novell Cluster Services 1.8.2 Administration Guide for
Guide. Then continue with
Agents" in "Installing a Novell Messenger
Guide.
System" in the
(Messenger Cluster Worksheet item
for Yes.
y
for No.
n
"Creating NSS Volumes" in
"Setting Up Non-root Access on an NSS
Linux" in "Installing a Novell Messenger
Testing Your Messenger Agent Installation
System" in the
"Configuring Your Messenger
Messenger 2.0 Installation
Nodes.
8), mount
Node.
"Installation and
Linux, you must set up
System" in the
"Starting the Linux
Messenger 2.0