Novell GROUPWISE 8 - INTEROPERABILITY Manual page 230

5d In the
address of the Messenger partition.
5e In the start service command, change
Messenger agents.
/etc/init.d/novell-nmma start
/etc/init.d/novell-nmaa start
6 If this is a traditional Linux volume, use the following load script:
#! /bin/bash
. /opt/novell/ncs/lib/ncsfunc
# define the IP address
RESOURCE_IP=123.123.1.
# define the file system type
MOUNT_FS=reiserf
# define the device
exit_on_error evms -f /var/opt/novell/ncs/ContainerActivate -rl
MOUNT_DEV=/dev/evms/Share/dat
# define the mount point
MOUNT_POINT=/mnt/mount_point
# mount the file system
exit_on_error mount -t $MOUNT_FS $MOUNT_DEV $MOUNT_POINT
# add the IP address
exit_on_error add_secondary_ipaddress $RESOURCE_IP
/etc/init.d/novell-nmma start
/etc/init.d/novell-nmaa start
exit 0
Make the following changes to set up the load script for the Messenger agents:
6a On the
GroupWise partition
Worksheet item
6b As needed on the
on nodes in the cluster.
6c On the
on nodes in the cluster.
6d On the
on nodes in the cluster.
6e Use the following command to start the Messaging Agent:
/etc/init.d/novell-nmma start
6f Use the following command to start the Archive Agent:
/etc/init.d/novell-nmaa start
7 Click Apply to save the load script.
230 GroupWise 8 Interoperability Guide
add_secondary_ipaddress
line, change
RESOURCE_IP
(Messenger Clustering Worksheet item 6
7)
line, change
MOUNT_FS
line, change
MOUNT_DEV
line, change
MOUNT_POINT
command, change
a.b.c.d
myservice start
to the secondary IP address of the
123.123.1.1
to whatever file system type is in use
reiserfs
/dev/evms/Share/dat
to the mount point directory in use
/mnt/mount_point
to the secondary IP
to the command to start the
Share 'uname -n'
and Messenger Clustering
to the actual device name in use