Table of Contents
Advertisement
Setting Up a Domain and a Post
1 4
Office in a Linux Cluster
You should have already reviewed
page 127
and filled out the
Section 13.7.2, "Agent Clustering Worksheet," on page
following tasks to set up GroupWise
Section 14.1, "Setting Up a New GroupWise System in a Linux Cluster," on page 137
Section 14.2, "Creating a New Secondary Domain in a Linux Cluster," on page 138
Section 14.3, "Creating a New Post Office in a Linux Cluster," on page 139
Section 14.4, "Installing and Configuring the MTA and the POA in a Cluster," on page 140
Section 14.5, "Testing Your Clustered GroupWise System," on page 154
Section 14.6, "Managing Your Clustered GroupWise System," on page 155
Section 14.7, "What's Next," on page 157
Section 14.8, "Clustering Quick Checklists," on page 158
14.1 Setting Up a New GroupWise System in a
Linux Cluster
The GroupWise Installation program walks you through setting up the primary domain and an initial
post office in the primary domain. You might be creating your primary domain and initial post office
on the same
GroupWise partition
domain and initial post office and then installed the GroupWise agents on multiple nodes in the
cluster, you can create additional secondary domains and post offices as needed.
To set up the primary domain and initial post office for a new GroupWise system in a clustering
environment:
1 Start with the first node on the domain failover list
2 Make sure that ConsoleOne
If necessary, you can download ConsoleOne for Linux from the
(http://download.novell.com). ConsoleOne is always installed in
3 If necessary, mount the
distribution directory
4 Mount the
GroupWise partition
needed, the GroupWise partition for the post office
where the primary domain and the initial post office for your new GroupWise system will be
created.
5 Run the GroupWise Installation program, as described in
Installation
Program" in
Installation
Guide.
Chapter 13, "Planning GroupWise in a Linux Cluster," on
Section 13.7.1, "System Clustering Worksheet," on page 134
®
in a clustering environment on Linux:
or on two different partitions. After you have created the primary
®
is installed on the node.
GroupWise partition
where you want to create the GroupWise software
(System Clustering Worksheet item
for the domain
"Installing a Basic GroupWise
Setting Up a Domain and a Post Office in a Linux Cluster
135. You are now ready to complete the
(Agent Clustering Worksheet item
Novell Product Downloads site
/usr/Consoleone
6).
(System Clustering Worksheet item
(System Clustering Worksheet item
"Starting the Linux GroupWise
System" in the
GroupWise 8
14
and the
2).
.
7) and, if
8),
137
Advertisement
Table of Contents
