Post Office Quick Checklist - Novell GROUPWISE 8 - INTEROPERABILITY Manual

Record cluster-specific information in the properties pages of the GroupWise objects that the
information pertains to.
See Section 3.7, "Managing Your Clustered GroupWise System," on page

3.9.3 Post Office Quick Checklist

Plan your new clustered post office.
See Section 2.4, "Planning a New Clustered Post Office," on page
Cluster-enable the volume where the post office will reside.
See Section 3.1.2, "Cluster-Enabling Shared Volumes for Use with GroupWise," on page
Make sure that short name resolution for the new post office volume works throughout your
network.
See Section 3.1.3, "Configuring Short Name Resolution," on page
Create the new post office.
See Section 3.4, "Creating a New Post Office in a Cluster," on page
Set up the POA for the new post office.
See Section 3.5, "Installing and Configuring the MTA and the POA in a Cluster," on page
Add the
of the post office volume. If you are running the POA in protected memory, add the
password
See "Editing Clustered Agent Startup Files" on page
Modify the post office volume resource load script:
Remove the
Add the
If you will not run the POA in protected memory, add the
and the
Add the POA
If you will run the POA in protected memory, add the
POA
address space
See "Modifying the Volume Resource Load Script for the Agents" on page
Modify the post office volume resource unload script:
Add the POA or address space
Remove the
See "Modifying the Volume Resource Unload Script for the Agents" on page
Set up the post office volume failover path and policies.
See "Setting the Failover Path and Policies for the Agents" on page
Test your new clustered post office.
See Section 3.6, "Testing Your Clustered GroupWise System," on page
64 GroupWise 8 Interoperability Guide
/ip startup switch to the POA startup file in order to provide the secondary IP address
startup switches so the POA can access the volume.
command
trustmig
command (optional)
search add
set developer option = off
command
load
command and add a corresponding
load
command
trustmig
49.
command
address space
protection restart
command
unload
57.
24.
42.
46.
/user
commands
set auto restart
parameter to the
command for the
50.
52.
53.
56.
41.
48.
and /