Installing And Configuring The Webaccess Application In A Cluster - Novell GROUPWISE 8 - INTEROPERABILITY Manual

Verifying WebAccess Agent Object Properties
During installation of the WebAccess Agent, the WebAccess Agent object should have been
configured correctly. However, it can be helpful to verify certain cluster-specific information in
order to familiarize yourself with the configuration of a clustered WebAccess Agent.
"Accessing WebAccess Agent Object Properties" on page 194
"Verifying Post Office Links" on page 194
"Forcing Use of the Web Access Agent Secondary IP Address" on page 194
Accessing WebAccess Agent Object Properties
1 In ConsoleOne, browse to and select the WebAccess Agent domain in order to display its
contents.
2 Right-click the WebAccess Agent object, then click Properties.
3 Continue with
Verifying Post Office Links
In the WebAccess object properties pages:
1 Click Post Office Links.
2 Verify that the Access Mode column displays C/S (for client/server mode) for all post offices
serviced by the WebAccess Agent.
3 Verify that the Links column displays the secondary IP addresses of the
where post offices reside, not the IP addresses of any nodes in the cluster.
4 Make changes if necessary.
5 Continue with
Forcing Use of the Web Access Agent Secondary IP Address
If you want the WebAccess Agent to always use its secondary IP address, rather than using the
primary IP address:
1 Click GroupWise > Network Address.
2 In the TCP/IP Address field, provide the secondary IP address
Worksheet item
3 Select Bind Exclusively to TCP/IP Address.
4 Click OK.
5 Continue with
16.3.4 Installing and Configuring the WebAccess Application
in a Cluster
If you have clustered your Web server, you must install the WebAccess Application on each node
where the Web server is installed, as described in
WebPublisher
Guide.
194 GroupWise 8 Interoperability Guide
Verifying Post Office
Forcing Use of the Web Access Agent Secondary IP
1) for the Internet Agent.
Testing the WebAccess Agent in a Linux
Application" in "Installing GroupWise
Links.
Cluster.
"Installing the WebAccess Application and
WebAccess" in the
GroupWise partitions
Address.
(WebAccess Agent Clustering
GroupWise 8 Installation