Creating A New Post Office In A Linux Cluster - Novell GROUPWISE 8 - INTEROPERABILITY Manual

7 Rebuild the domain database for the new domain, following the steps provided in
Domain or Post Office
The database rebuild is necessary in order to transfer the MTA configuration information and
the domain link information into the secondary domain database, because the MTA for the new
domain is not yet running.
8 Skip to Installing and Configuring the MTA and the POA in a Cluster
software for the new domain.
14.3 Creating a New Post Office in a Linux
Cluster
You can create a new post office on the same
separate GroupWise partition. If the post office and its domain are on the same GroupWise partition,
they fail over together. If they are on separate GroupWise partitions, they fail over separately.
To create a new post office in a clustering environment on Linux:
1 Mount the GroupWise partition where the domain that will own the new post office located.
2 If necessary, mount the GroupWise partition for the new post office
3 In ConsoleOne, connect to the GroupWise domain where you want to create the new post
office, as described in
Administration Guide.
4 Create the new post office, following the steps provided in
"Post Offices" in the
Use the Post Office Worksheet you filled out in
Office," on page 131
5 Refer to the Agent Clustering Worksheet that you filled in during
to Install and Configure the Linux Agents in a Cluster," on page 132
address and port numbers that you need to specify in order to configure the link.
6 If you want to create a library at the post office, select Create Library.
This option creates the document storage area for the library under the post office directory and
is not recommended for large libraries.
7 Right-click the new POA object, then click Properties.
On the POA Agent Settings and Scheduled Events pages, you might want to specify unique
times for the following POA activities to prevent multiple POAs from performing the same
activities on the same node at the same time during a failover situation:
Start User Upkeep
Generate Address Book for Remote
Enable QuickFinder Indexing
Mailbox/Library Maintenance Event
For more information about these repetitive POA activities, see
Upkeep", "Regulating
Agent" in the GroupWise 8 Administration
8 Make sure you are still connected to the domain that owns the new post office.
Databases" in "Databases" in the
GroupWise partition
"Connecting to a Domain" in "Domains" in the
GroupWise 8 Administration
to fill in the fields in the Create GroupWise Post Office dialog box.
Indexing", and "Scheduling Database
Guide.
Setting Up a Domain and a Post Office in a Linux Cluster 139
GroupWise 8 Administration
to install the MTA
where its domain resides or on a
GroupWise 8
"Creating the New Post
Guide.
Section 13.4, "Planning a New Clustered Post
Section 13.6, "Deciding How
for the secondary IP
"Performing Nightly User
Maintenance" in
"Rebuilding
Guide.
Office" in
"Post Office