Installing And Configuring The Mta And The Poa In A Cluster - Novell GROUPWISE 8 - INTEROPERABILITY Manual

5 In ConsoleOne, right-click the new Post Office object, then click Properties.
6 Click GroupWise > Post Office Settings, then in the Access Mode field, select Client/Server
Only.
7 Right-click the new POA object, then click Properties.
On the POA Agent Settings and Scheduled Events pages, you might want to specify unique
times for the following POA activities to prevent multiple POAs from performing the same
activities on the same node at the same time during a failover situation:
Start User Upkeep
Generate Address Book for Remote
Enable QuickFinder Indexing
Mailbox/Library Maintenance Event
For more information about these repetitive POA activities, see
Upkeep",
Agent" in the
8 Make sure you are still connected to the domain that owns the new post office.
9 Rebuild the post office database for the new post office, following the steps provided in
"Rebuilding Domain or Post Office
Administration
Worksheet item
you created in
The database rebuild is necessary in order to transfer the POA configuration information and
the post office link information into the post office database, because the POA for the new post
office is not yet running.
10 If you want to create a library
office, follow the steps in
in "Libraries and
completely finished setting up the new clustered post office.
11 Continue with
34.5 Installing and Configuring the MTA and the
POA in a Cluster
After you have created a new domain and/or post office, you are ready to install and configure the
GroupWise agents. Complete all the tasks below if you are setting up a new GroupWise system or if
you have created a new GroupWise resource group where you want to install the agent software:
Section 34.5.1, "Installing the Agent Software in a Cluster," on page 299
Section 34.5.2, "Editing Clustered Agent Startup Files," on page 300
Section 34.5.3, "Setting Up New Instances of the Agents without Installing the Agent
Software," on page 300
298 GroupWise 8 Interoperability Guide
"Regulating Indexing", and
GroupWise 8 Administration
Guide. Be sure to browse to the database location
7) through the shared disk you accessed in
Step 2 above.
(System Clustering Worksheet item
"Setting Up a Basic
Documents" in the
Installing and Configuring the MTA and the POA in a
"Scheduling Database
Guide.
Databases" in "Databases" in the
Step 1
Library" or "Setting Up a Full-Service
GroupWise 8 Administration
"Performing Nightly User
Maintenance" in "Post Office
GroupWise 8
(System Clustering
to the post office directory
9) for the new clustered post
Library"
Guide, after you have
Cluster.