Clustering Quick Checklists; Groupwise System Quick Checklist - Novell GROUPWISE 8 - INTEROPERABILITY Manual

Connecting your clustered GroupWise system to other e-mail systems through GroupWise
gateways. See
page 103.
Monitoring the status of your clustered GroupWise system from your Web browser. See
Chapter 7, "Monitoring a GroupWise System in a NetWare Cluster," on page
Backing up your clustered GroupWise system. See
System in a NetWare Cluster," on page

3.9 Clustering Quick Checklists

Section 3.9.1, "GroupWise System Quick Checklist," on page 62
Section 3.9.2, "Domain Quick Checklist," on page 63
Section 3.9.3, "Post Office Quick Checklist," on page 64

3.9.1 GroupWise System Quick Checklist

Plan your new clustered GroupWise system.
See Chapter 2, "Planning GroupWise in a NetWare Cluster," on page
Cluster-enable the volumes where GroupWise domains and post offices will reside.
See Section 3.1.2, "Cluster-Enabling Shared Volumes for Use with GroupWise," on page
Make sure that short name resolution works throughout your network.
See Section 3.1.3, "Configuring Short Name Resolution," on page
Create the primary domain and initial post office in your new clustered GroupWise system.
See Section 3.2, "Setting Up a New GroupWise System in a Cluster," on page
Set up the agents for the primary domain and the initial post office.
See Section 3.5, "Installing and Configuring the MTA and the POA in a Cluster," on page
Modify the volume resource load script(s):
Remove the
Add the
If you will not run the agents in protected memory, add the
commands and the
Add the agent
If you will run the agents in protected memory, add the
load
address space
See "Modifying the Volume Resource Load Script for the Agents" on page
Modify the volume resource unload script(s):
Add the agent or address space
Remove the
See "Modifying the Volume Resource Unload Script for the Agents" on page
Set up the volume failover path(s) and policies.
62 GroupWise 8 Interoperability Guide
Chapter 6, "Implementing GroupWise Gateways in a NetWare Cluster," on
command
trustmig
command (optional)
search add
set developer option = off
command(s)
load
command(s) and add a corresponding
command
trustmig
Chapter 8, "Backing Up a GroupWise
107.
command
address space
protection restart
command(s)
unload
105.
21.
42.
44.
set auto restart
parameter to the
command for each
50.
52.
41.
48.