Deciding Where To Install The Webaccess Agent And Its Mta; Planning The Mta Installation; Planning The Webaccess Installation - Novell GROUPWISE 8 - INTEROPERABILITY Manual

36.2.5 Deciding Where to Install the WebAccess Agent and Its
MTA
As with the MTA and the POA, you can choose to install the WebAccess Agent and its MTA to
each node in the cluster or to the shared disk of the WebAccess resource group. For a discussion of
these alternatives, see
the issues in the context of planning MTA and POA installations.
WEBACCESS CLUSTERING WORKSHEET
Under Item 3: MTA Installation Location
whether you will install the WebAccess Agent and its MTA to each node in the cluster or to the shared
disk of the WebAccess resource group. Also specify where the MTA startup file will be stored.

36.2.6 Planning the MTA Installation

Follow the instructions in
After you follow the instructions, you will have a filled-out Windows Agent Worksheet to use when
you install the MTA.
IMPORTANT: Do not install the Windows MTA until you are instructed to do so in
"Setting Up WebAccess in a Cluster," on page

36.2.7 Planning the WebAccess Installation

Aside from the cluster-specific issues discussed in the preceding sections, the considerations
involved in planning to install WebAccess are the same in a clustering environment as for any other
environment. Review
WebAccess Installation Summary
8 Installation
Agent and the WebAccess Application in two separate steps:
"Planning the WebAccess Agent Installation" on page 318
"Planning the WebAccess Application Installation" on page 319
IMPORTANT: Do not install the WebAccess software until you are instructed to do so in
Section 36.3, "Setting Up WebAccess in a Cluster," on page
Planning the WebAccess Agent Installation
For the WebAccess Agent, fill out items 2 through 12 on the GroupWise WebAccess Installation
Worksheet, taking into account the following cluster-specific issues:
318 GroupWise 8 Interoperability Guide
"Deciding Where to Install the Agent Software" on page
and
"Planning the MTA Installation" on page
"Planning GroupWise
Sheets" in
Guide. When you set up WebAccess in a cluster, you will install the WebAccess
Item 5: WebAccess Agent Installation
319.
WebAccess", then print and fill out the
"Installing GroupWise
319.
285, which describes
Location, mark
318, then return to this point.
Section 36.3,
"GroupWise
WebAccess" in the GroupWise