Webaccess Clustering Worksheet - Novell GROUPWISE 8 - INTEROPERABILITY Manual

on the node where the WebAccess Application is currently running. However, the other nodes on the
WebAccess Application failover path are not currently available for update. therefore, you must
manually copy the updated
node in the WebAccess Application failover path.

5.5 WebAccess Clustering Worksheet

Item
1) Shared Volume for
WebAccess Agent:
Cluster Enabled?
Yes (highly recommended)
Cluster volume IP address
No
2) WebAccess Agent
Domain Name:
Domain Database Location:
3) WebAccess Agent
Failover Path:
4) MTA Installation Location:
on
vol:\system
WebAccess Agent volume
sys:\system on each
node
Consolidate multiple MTA
startup files on WebAccess
Agent volume?
5) MTA Network Information:
MTA IP address
MTA message transfer port
MTA live remote port
MTA HTTP port
6) WebAccess Agent
Installation Location:
vol:\system on the
WebAccess Agent volume
on each
sys:\system
node
file to the
commgr.cfg sys:\novell\webaccess
Explanation
Specify the name (cluster_volume) of the shared volume where the
WebAccess Agent domain will be created.
For cluster-enabling, specify the IP addresses of the virtual server
(volume_.cluster) to which the cluster-enabled volume is tied.
For more information, see
WebAccess Agent Volume" on page
Specify a unique name for the WebAccess Agent domain. Specify the
directory on the WebAccess Agent volume where you want to create
the new domain.
For more information, see
WebAccess Agent" on page
List other nodes in the cluster where the WebAccess Agent and its
MTA could fail over.
For more information, see
for the WebAccess Agent Volume" on page
Mark the location where you will install the MTA software.
If necessary, specify the location where you will consolidate multiple
MTA startup files on a WebAccess Agent volume.
For more information, see
Agent and Its MTA" on page
Gather the MTA network address information from the WebAccess
section of the "IP Address Worksheet" on page
For more information, see
Cluster-Unique Port Numbers for the WebAccess Agent and Its MTA"
on page 87.
Mark the location where you will install the WebAccess Agent
software.
For more information, see
Agent and Its MTA" on page
subdirectory on each
"Deciding Whether to Cluster-Enable the
86.
"Planning a New Domain for the
86.
"Determining an Appropriate Failover Path
87.
"Deciding Where to Install the WebAccess
87.
37.
"Planning a Secondary IP Address and
"Deciding Where to Install the WebAccess
87.
Implementing WebAccess in a NetWare Cluster 99