Novell GROUPWISE 8 - INTEROPERABILITY Manual page 76

If your system seems to be trying to kill the address space before the Internet Agent and its
MTA have been completely unloaded, resulting in the agents hanging in the unloading
state, set a delay of several seconds before issuing the
command to allow the Internet Agent and its MTA adequate time to unload completely.
The length of the delay varies from system to system; ten seconds is a good starting place.
unload address space=addr_space_name
delay 10
unload kill address space=addr_space_name
If you marked No under Load Internet Agent and Its MTA in Protected Memory?
Agent Clustering Worksheet items
command that you placed in the load script.
unload gwia.nlm
unload gwmta.nlm
Remove the
The result would look similar to the following example:
3 Click Apply to save the unload script.
4 If necessary, click OK to confirm that you must offline and then online the volume resource in
order for the changes to take effect.
5 Continue with
Setting the Failover Path and Policies for the Internet Agent
To modify the failover path and policies for the Internet Agent volume resource:
1 In ConsoleOne, in the properties pages for the Volume Resource object (volume_SERVER),
click Nodes to display the default failover path for the Internet Agent volume resource.
76 GroupWise 8 Interoperability Guide
command just like you did in the load script.
trustmig
Setting the Failover Path and Policies for the Internet
unload kill address space
8), create an command parallel to each
unload
(Internet
load
Agent.