Testing Your Clustered Groupwise System - Novell GROUPWISE 8 - INTEROPERABILITY Manual

9 Click OK to save the modified properties.
10 In the Cluster State View, take the GroupWise volume offline and then bring it online again to
test the new startup files and the modified load and unload scripts. If you need assistance with
these tasks, see

3.6 Testing Your Clustered GroupWise System

After you have configured the GroupWise volume resources, you can test the load and unload
scripts by bringing the GroupWise volume online and taking it offline again.
1 In ConsoleOne, select the Cluster object, then click View > Cluster State.
The new GroupWise volume resource shows Offline in the State column.
2 Click the new GroupWise volume resource, then click Online.
The State column for the volume resource now displays Running.
3 Observe the server console where the MTA and/or POA are loading to see that they start and
run correctly.
If you are using protected memory, you can use the
console prompt to list all the address spaces on the node and what NLM programs are running
in each one.
4 Click the new GroupWise volume resource, then click Offline.
The State column for the volume resource returns to Offline.
5 Observe the server console where the MTA and/or POA are unloading to see that they shut
down correctly.
56 GroupWise 8 Interoperability Guide
Section 3.6, "Testing Your Clustered GroupWise System," on page
command at the server
protection
56.