Updating Groupwise Objects With Cluster-Specific Descriptions - Novell GROUPWISE 8 - INTEROPERABILITY Manual

36.4.1 Updating GroupWise Objects with Cluster-Specific
Descriptions
After installing WebAccess in your clustered GroupWise system, while the cluster-specific
information is fresh in your mind, you should record that cluster-specific information as part of the
GroupWise objects in ConsoleOne so that you can easily refer to it later. Be sure to update the
information recorded in the GroupWise objects if the configuration of your system changes.
"Recording Cluster-Specific Information about the WebAccess Agent Domain and Its MTA"
on page 323
"Recording Cluster-Specific Information about the WebAccess Agent" on page 323
Recording Cluster-Specific Information about the WebAccess Agent Domain and Its
MTA
To permanently record important cluster-specific information for the WebAccess Agent domain:
1 In ConsoleOne, browse to and right-click the Domain object, then click Properties.
2 In the Description field of the WebAccess Agent domain Identification page, provide a cluster-
specific description of the WebAccess Agent domain, including the resource group IP address
and the cluster-unique port numbers used by its MTA.
You might also want to include cluster-specific information about the WebAccess Application,
such as the resource group IP address of the Web server where the WebAccess Application is
installed.
3 Click OK to save the WebAccess domain description.
4 Select the WebAccess Domain object to display its contents.
5 Right-click the MTA object, then click Properties.
6 In the Description field of the MTA Identification page, record the WebAccess resource group
IP address and the cluster-unique port numbers used by the MTA.
This information appears on the MTA console, no matter which node in the cluster it is
currently running on.
7 Click OK to save the MTA description.
8 Continue with
Recording Cluster-Specific Information about the WebAccess
Recording Cluster-Specific Information about the WebAccess Agent
With the contents of the WebAccess domain still displayed:
1 Right-click the WEBAC80A object, then click Properties.
2 Click GroupWise > Identification.
3 In the Description field, record the WebAccess resource group IP address and the cluster-
unique port numbers used by the WebAccess Agent.
This information appears on the WebAccess Agent console, no matter which node in the cluster
it is currently running on.
4 Click OK to save the WebAccess Agent information.
5 Continue with Knowing What to Expect in WebAccess Failover Situations.
Implementing WebAccess in a Microsoft Cluster 323
Agent.