Novell GROUPWISE 8 - INTEROPERABILITY Manual page 75

The result would look similar to the following example:
NOTE: The commands are needed in the load script only when the MTA and the Internet
set
Agent are not running in protected memory. The address space parameters are needed in the
commands only when the MTA and the Internet Agent are running in protected memory.
load
4 Click Apply to save the load script.
5 If necessary, click OK to confirm that you must offline and then online the volume resource in
order for the changes to take effect.
6 Continue with Modifying the Volume Resource Unload Script for the Internet
Modifying the Volume Resource Unload Script for the Internet Agent
The volume resource unload script executes whenever the Internet Agent volume goes offline.
Programs should be unloaded in the reverse order of how they were loaded. This ensures that
supporting programs are not unloaded before programs that rely on them in order to function
properly.
To set up the unload script:
1 In ConsoleOne, in the properties pages for the Volume Resource object (volume_SERVER),
click Unload to display the default volume resource unload script.
The next step assumes that this is the first time you have edited this unload script. If other
GroupWise agents are already running from this volume, some of the modifications have
already been made.
2 Make the following changes to the default unload script:
If you marked Yes under Load Internet Agent and Its MTA in Protected Memory?
(Internet Agent Clustering Worksheet item
and an
unload kill address space
completely cleaned up.
unload address space=addr_space_name
unload kill address space=addr_space_name
8), add an
unload address space
command to ensure that the address space is
Implementing the Internet Agent in a NetWare Cluster
Agent.
command
75