Setting Up Your Messenger System In A Cluster; Installing The Messenger Agents To Each Node In The Cluster; Installing The Messenger Agents To A Shared Disk - Novell GROUPWISE 8 - INTEROPERABILITY Manual

41.2 Setting Up Your Messenger System in a
Cluster
You should have already reviewed
on page 335
"Novell Messenger
the installation location you have chosen:
Section 41.2.1, "Installing the Messenger Agents to Each Node in the Cluster," on page 338
Section 41.2.2, "Installing the Messenger Agents to a Shared Disk," on page 338
41.2.1 Installing the Messenger Agents to Each Node in the
Cluster
1 Follow the steps provided in
Your Messenger
Installation Guide
2 After you have installed the software to each node in the cluster, if you selected Yes for
Consolidate Startup Files? (under
Messenger agent startup files to the planned location on the shared disk, then delete them from
the
c:\novell\nm\ma
confusion.
3 Make each node in the cluster active to make sure that the Messenger agents start successfully
on each node.
4 Continue setting up your Messenger system following the instructions in
"Installing a Novell Messenger

41.2.2 Installing the Messenger Agents to a Shared Disk

Complete the following tasks to set up your Messenger system on a shared disk:
"Setting Up the Messenger Resource Group" on page 338
"Running the Messenger Installation Program" on page 339
"Testing the Clustered Messenger Agents" on page 339
Setting Up the Messenger Resource Group
1 Create the Messenger resource group and agent services resources
Worksheet item
Cluster" on page
2 To ensure successful short name resolution, add entries for the Messenger network name to
support your preferred methods of short name resolution, as described in
Name Resolution" on page
3 Continue with
338 GroupWise 8 Interoperability Guide
Section 41.1, "Planning Your Messenger System in a Cluster,"
and filled out Section 41.3, "Messenger Clustering Worksheet," on page 339
Worksheet" in the
"Starting the Messenger Installation
System" in "Installing a Novell Messenger
for each node in the cluster.
and
c:\novell\nm\aa
System" in the
4), as planned in
336.
294.
Running the Messenger Installation
Messenger 2.0 Installation
Messenger Clustering Worksheet item
directories on each node to avoid future
Messenger 2.0 Installation
"Planning the Messenger Agents on Each Node in the
Program.
and the
Guide. Follow the instructions for
Program" and "Creating
System" in the Messenger 2.0
3), copy the
"What's Next" in
Guide.
(Messenger Clustering
"Configuring Short