Novell GROUPWISE 8 - INTEROPERABILITY Manual page 52

5 If necessary, click OK to confirm that you must offline and then online the volume resource in
order for the changes to take effect.
6 Continue with
Modifying the Volume Resource Unload Script for the Agents
The volume resource unload script executes whenever the GroupWise volume goes offline.
Programs should be unloaded in the reverse order of how they were loaded. This ensures that
supporting programs are not unloaded before programs that rely on them in order to function
properly.
To set up the unload script:
1 In ConsoleOne, in the properties pages for the Volume Resource object (volume_SERVER),
click Unload to display the default volume resource unload script.
2 Make the following changes to the default unload script:
If you marked Yes under Load Agents in Protected Memory?
Worksheet item
Add an
completely cleaned up.
unload address space=addr_space_name
unload kill address space=addr_space_name
If you marked No under Load Agents in Protected Memory?
item
load script.
unload agent.nlm
Remove the
The result would look similar to the following example:
3 Click Apply to save the unload script.
4 If necessary, click OK to confirm that you must offline and then online the volume resource in
order for the changes to take effect.
5 Continue with
52 GroupWise 8 Interoperability Guide
Modifying the Volume Resource Unload Script for the
8), add an
unload address space
unload kill address space
8), create an command parallel to each
unload
command just like you did in the load script.
trustmig
Setting the Failover Path and Policies for the
Agents.
(Agent Clustering
command for each address space.
command to ensure that the address space is
(Agent Clustering Worksheet
command that you placed in the
load
Agents.