Novell GROUPWISE 8 - INTEROPERABILITY Manual page 74

To set up the load script:
1 In ConsoleOne, browse to and select the Cluster object.
If necessary, click View > Console View to display its contents.
2 Right-click the Volume Resource object (volume_SERVER), then click Properties > Load to
display the default volume resource load script for the Internet Agent volume.
The next step assumes that this is the first time you have edited this load script. If other
GroupWise agents are already running from this volume, some of the modifications have
already been made.
3 Make the following changes to the default load script:
Remove the
Agent volume. Removing this line helps the load script to execute faster.
If you selected
(Internet Agent Clustering Worksheet items 4 and
the new
search add volume:\system
If you selected
Clustering Worksheet items 4 and
Internet Agent configuration file on the Internet Agent volume, add that location to the
server search path.
If you marked No under Load Internet Agent and Its MTA in Protected Memory?
Agent Clustering Worksheet item
set auto restart after abend = 2
set auto restart after abend delay time = 0
set auto restart down timeout = 60
set developer option = off
These settings provide the best possible handling of GroupWise databases in the event that
an abend should occur within the cluster.
Transfer the MTA
vol:\system
into the load script page. Then delete or rename the
confusion.
load volume:\system\gwmta.nlm @domain.mta
Transfer the Internet Agent
vol:\system
into the load script page. Then delete or rename the
confusion.
load volume:\system\gwia.nlm @gwia.cfg
If you marked Yes under Load Internet Agent and Its MTA in Protected Memory?
(Internet Agent Clustering Worksheet item
load
MTA will run. Add a
load address space=addr_space_name
load address space=addr_space_name
protection restart addr_space_name
74 GroupWise 8 Interoperability Guide
command. It is not necessary to migrate trustees for the Internet
trustmig
on Internet Agent volume as the installation location
vol:\system
directory to the server search path.
vol:\system
on each node as the installation location
sys:\system
command from the
load
directory into the load script. Use Ctrl+C and Ctrl+V to copy and paste text
load
directory into the load script. Use Ctrl+C and Ctrl+V to copy and paste text
commands to specify the protected address space where the Internet Agent and its
protection restart
6), add a
6) but you are storing the MTA startup file and the
8), add the following abend recovery options:
grpwise.ncf
grpwise.ncf
command from the
gwia.ncf
gwia.ncf
8), add the
address space
command for the address space name.
volume:\system\gwmta.nlm @domain.mta
volume:\system\gwia.nlm @gwia.cfg
command to add
search add
(Internet Agent
(Internet
file located in the
file to avoid future
file located in the
file to avoid future
parameter to the