Agent Clustering Worksheet - Novell GROUPWISE 8 - INTEROPERABILITY Manual

Item
8) GroupWise Partition for Post Office:
Secondary IP Address:
9) Domain Name:
Domain Directory:
10) Post Office Name:
Post Office Directory:
11) Document Storage Area Location:
At the post office
Outside the post office
Separate post office

13.7.2 Agent Clustering Worksheet

Item
1) Domain Name:
Domain Location:
2) Domain Failover List:
3) MTA Network Information:
MTA IP address
MTA message transfer port
MTA HTTP port
4) Post Office Name:
Post Office Location:
5) Post Office Failover List:
Explanation
Specify the name of the shared partition where the GroupWise
post office will reside and its secondary IP address.
For more information, see
Clustered Post Office," on page
Specify a unique name for the domain. Specify the directory on
the GroupWise partition where you want to create the new
domain.
For more information, see
Clustered Domain," on page
Specify a unique name for the post office. Specify the directory
on the GroupWise partition where you want to create the post
office.
For more information, see
Clustered Post Office," on page
If you need a library for a clustered post office, mark where you
want to create its document storage area and provide a
directory if necessary.
For more information, see
Library for a Clustered Post Office," on page
Explanation
Transfer this information from the System Clustering
Worksheet (item 9).
List other nodes in the cluster where the GroupWise domain
and its MTA could fail over.
For more information, see
Appropriate Failover Lists for the Agents," on page
Record the MTA network address information for the server
where the MTA will run. The MTA IP address is the same as
the domain secondary IP address in the cluster.
See Section 13.6.1, "Recording Secondary IP Addresses for
the Agents," on page 132.
Transfer this information from the System Clustering
Worksheet (item 10).
List other nodes in the cluster where the GroupWise post office
and its POA could fail over.
For more information, see
Appropriate Failover Lists for the Agents," on page
Section 13.4, "Planning a New
131.
Section 13.3, "Planning a New
130.
Section 13.4, "Planning a New
131.
Section 13.5, "Planning a New
131.
Section 13.6.2, "Determining
132.
Section 13.6.2, "Determining
132.
Planning GroupWise in a Linux Cluster 135