Stop Disk Pool Locate; Stop Enclosure Blink; Stop Pending Snapshot Images On Consistency Group - Dell PowerVault Manual

Stop Disk Pool Locate

Description
This command turns off the indicator lights on the physical disks that were turned on by the start
diskPool locate command.
Syntax
stop diskPool locate

Stop Enclosure Blink

Description
This command turns off the indicator LED on the enclosure that was turned on by the start
enclosure blink command.
Syntax
stop enclosure blink
Parameters
None.

Stop Pending Snapshot Images On Consistency Group

Description
This command stops all of the pending snapshot images that are to be created on a snapshot
consistency group. If the snapshot consistency group does not have any pending snapshot images, the
MD storage management software displays an error message and does not run the command.
Syntax
stop consistencyGroup [consistencyGroupName] pendingSnapImageCreation
Parameter
Parameter
consistencyGroupName
372
Description
The name of the consistency group for which you
want to stop any pending snapshot operation.
Enclose the name of the consistency group in
square brackets ([ ]).