second Ethernet connection to the network allow two separate physical paths for each host, which
ensures full redundancy if one of the paths fails. It is recommended you use two switches for more
redundancy. However, single switch configuration is also supported.
Figure 4. 64 Servers Connected to Two RAID Controllers
Remote Replication
Remote Replication is a storage array premium feature that provides online, real-time replication of data
between storage arrays. The following figure shows an example of how to setup a Remote Replication
environment. For more information on Remote Replication, see the Dell PowerVault MD Series
Administrators Guide at dell.com/powervaultmanuals.
14