Show Storage Array Lun Mappings; Show Storage Array Negotiation Defaults; Show Storage Array Unconfigured Iscsi Initiators - Dell PowerVault MD3260 Cli Manual

Syntax
show storageArray hostTopology
Parameters
None.

Show Storage Array LUN Mappings

This command returns information from the storage array profile about the storage array LUN mappings. If you run this
command with no parameters, this command returns all LUN mappings.
Syntax
show storageArray lunMappings [host ["hostName"]
|
hostgroup ["hostGroupName"]]
Parameters
Parameter
host
hostGroup

Show Storage Array Negotiation Defaults

This statement returns information about connection-level settings that are subject to initiator-target negotiation.
Syntax
show storageArray iscsiNegotiationDefaults
Parameters
None.
NOTE: Information returned includes RAID controller module default settings (settings that are the starting point for
negotiation), and the current active settings.

Show Storage Array Unconfigured iSCSI Initiators

This command returns a list of initiators that have been detected by the storage array but are not yet configured into the
storage array topology.
Syntax
show storageArray unconfiguredIscsiInitiators
Parameters
None.
202
Description
Name of a specific host for which to see the LUN
mappings. You must put quotation marks (" ") and brackets
([ ]) around the host name. The host name and quotation
marks must be inside the brackets.
Name of a specific host group for which to see the LUN
mappings. You must put quotation marks (" ") and brackets
([ ]) around the host group name.The host group name and
quotation marks must be inside the brackets.