Set Physical Disk Channel Status
This command defines how the physical disk channel performs.
Syntax
set physicalDiskChannel [(1 | 2 )]
status=(optimal | degraded)
Parameters
Parameter
physicalDiskChannel Identifier number of the physical disk channel for
status
Set Physical Disk Hot Spare
This command assigns or unassigns one or more physical disks as a hot spare.
Syntax
set (physicalDisk [enclosureID,slotID] |
physicalDisks [enclosureID1,slotID1 enclosureID2,
slotID2 ... enclosureIDn,slotIDn])
hotSpare=(TRUE | FALSE)
198
Script Commands
Description
which to set the status. Valid physical disk channel
values are 1 or 2. You must put brackets ([ ]) around
the physical disk channel number.
Condition of the channel. You can set the channel
status to optimal or degraded.
NOTE:
optimal
Use the
channel back to the Optimal state. Use the
parameter if the channel is experiencing problems, and
the storage array requires additional time for data
transfers.
parameter to move a degraded
degraded