Table of Contents
Advertisement
Next steps
In a web browser, access Unisphere by specifying the URL: http://<ip_address>/.
Where, <ip_address> is the IP address you set for the storage system.
NOTE:
Refer to the Configuration Worksheet for information on the user credentials you must use the first time you log on.
The Initial Configuration Wizard launches the first time you access Unisphere. Refer to the Configuration Worksheet and
Unisphere Online Help for more information on configuring and start using your system.
Unpack the (optional) disk-array enclosures
Disk-array enclosures (DAEs) provide additional storage. The types of DAEs available are:
● 3U 15 disk 3.5" drive DAE
● 2U 25 disk 2.5" drive DAE
DAEs are optional. If you have one or more DAEs in the system, verify that you have received all of the DAE components,
including cables, bezel, rail kit, and mounting screws.
15-drive DAE container contents
Verifying shipping package contents
About this task
Confirm that you received all necessary equipment needed to install the new 15-drive DAE.
Verify that you received the following:
Component
Disk-array enclosure (DAE)
Snap in rail kit
20
Installation Procedures
Front view
Rear view
CL4139
Quantity
1
CL5665
1 (includes 2
rails and 6
screws)
CL5766
Advertisement
Table of Contents
