Download Storage Array Firmware/Nvsram - Dell PowerVault MD3260 Cli Manual

download firmware on all of the physical disks in the storage array. See Download Storage Array Physical Disk
Firmware.) This command blocks all I/O activity until the download finishes or fails. The download returns one of the
following statuses:
• Successful
• Unsuccessful With Reason
• Never Attempted With Reason.
This command is used to download a firmware image to only one physical disk at a time. If you use this command in a
script, ensure that you use this command only once. If you use this command more than once, the operation may fail.
You can download firmware images to all of the physical disks in a storage array at one time by using the Download
Storage Array Physical Disk Firmware command.
Syntax
download physicalDisk [enclosureID,slotID]
firmware file="filename"
Parameters
Parameter
physicalDisk
filename

Download Storage Array Firmware/NVSRAM

This command downloads firmware and, optionally, NVSRAM values for the RAID controller module in the storage array.
If you want to download only NVSRAM values, use the downLoad storageArray NVSRAM command.
Syntax
download storageArray firmware [, NVSRAM]
file="filename" [, "NVSRAM-filename"]
[downgrade=(TRUE | FALSE)]
[activateNow=(TRUE | FALSE)]
Parameters
Parameter
NVSRAM
file
140
Description
Physical disk to which to download the firmware image.
Specify the enclosure ID and slot ID for the physical disk.
Enclosure ID values are 0 to 99. Slot ID values are 0 to
31. You must put brackets ([ ]) around the enclosure ID
value and slot ID value.
File path and file name of the file that contains the
firmware image. You must put quotation marks (" ") around
the firmware image file path and file name.
Description
Specifies that you want to download a file with NVSRAM
values when you download a firmware file. You must not
put brackets around this parameter. Include a comma
after the term firmware.
File path and name of the file that contains the firmware.
Valid file names must end with a .dlp extension. You must
put quotation marks (" ") around the file name.