Clear Physical Disk Port Statistics - Dell PowerVault Manual

Modular disk storage arrays
Hide thumbs Also See for PowerVault:
Table of Contents

Advertisement

Parameter
consistencyErrorFile
mediaErrorFile
priority
startingLBA
endingLBA
verbose
NOTE: The starting logical block address and the ending logical block address are useful for very
large single-virtual disk LUNs. Running a virtual disk consistency check on a very large single-virtual
disk LUN can take a long time. By defining the beginning address and ending address of the data
blocks, you can reduce the time that a virtual disk consistency check takes to complete.

Clear Physical Disk Port Statistics

Description
This command resets the statistics for all physical disk ports.
Syntax
clear allPhysicalDiskChannels stats
Parameters
None.
148
Description
special characters, you must also put quotation
marks (" ") around the virtual disk name.
Name of the file in which to save the consistency
error information. You must put quotation marks
(" ") around the file name.
Name of the file in which to save the media error
information. You must put quotation marks (" ")
around the file name.
Specifies the priority that the consistency check
has relative to host I/O activity. Valid entries are
highest, high, medium, low, or lowest.
The starting logical block address. Use integer
values.
The ending logical block address. Use integer
values.
Captures progress details, such as percent
complete, and shows the information while virtual
disk consistency is being repaired. To capture
progress details, set this parameter to TRUE. To
prevent capturing progress details, set this
parameter to FALSE.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powervault series

Table of Contents